传 真：0574-62972698
座 机：0574-62970745
邮 箱：yyxtl@china-iadapter.com
网址：www.yyxtl.com
地 址：余姚市丈亭镇下齐塔路西33号
| 代 号 PART NO. | 螺 纹 THREAD | 管子外径 TUBE O.D. | 尺 寸 DIMENSIONS | 压力等级 MPa | |||||
| E | F | D1 | B | l1 | L1 | S1 | S2 | ||
| 1CG-12-02 | M12X1.5 | G1/8"X28 | 6 | 9.5 | 8.5 | 23 | 14 | 14 | 31.5 轻系列 L |
| 1CG-12-04 | M12X1.5 | G1/4"X19 | 6 | 10 | 10 | 25 | 19 | 14 | |
| 1CG-14-04 | M14x1.5 | G1/4"X19 | 8 | 10 | 10 | 25 | 19 | 17 | |
| 1CG-14-06 | M14x1.5 | G3/8"X19 | 8 | 11.5 | 11.5 | 26 | 22 | 17 | |
| 1CG-14-08 | M14x1.5 | G1/2"X14 | 8 | 14 | 13 | 27.5 | 27 | 34 | |
| 1CG-16-04 | M16x1.5 | G1/4"X19 | 10 | 10 | 11 | 26 | 19 | 19 | |
| 1CG-16-06 | M16x1.5 | G3/8"X19 | 10 | 11.5 | 12.5 | 27 | 22 | 19 | |
| 1CG-16-08 | M16x1.5 | G1/2"X14 | 10 | 14 | 14 | 29 | 27 | 19 | |
| 1CG-18-06 | M18x1.5 | G3/8"X19 | 12 | 11.5 | 12.5 | 27 | 22 | 22 | |
| 1CG-18-08 | M18x1.5 | G1/2"X14 | 12 | 14 | 13 | 28 | 27 | 22 | |
| 1CG-22-06 | M22x1.5 | G3/8"X19 | 15 | 11.5 | 13.5 | 29 | 24 | 27 | |
| 1CG-22-08 | M22x1.5 | G1/2"X14 | 15 | 14 | 14 | 29 | 27 | 27 | |
| 1CG-22-12 | M22x1.5 | G3/4"X14 | 15 | 15.5 | 20 | 30 | 32 | 32 | |
| 1CG-26-08 | M26x1.5 | G1/2"X14 | 18 | 14 | 14.5 | 31 | 27 | 32 | |
| 1CG-26-12 | M26x1.5 | G3/4"X14 | 18 | 15.5 | 14.5 | 32 | 32 | 32 | |
| 1CG-30-12 | M30x2 | G3/4"X14 | 22 | 15.5 | 16.5 | 33 | 32 | 36 | 16 轻系列 L |
| 1CG-30-16 | M30x2 | G1"X11 | 22 | 18 | 17.5 | 35 | 41 | 36 | |
| 1CG-36-16 | M36x2 | G1"X11 | 28 | 18 | 17.5 | 34 | 41 | 41 | |
| 1CG-45-20 | M45x2 | G1.1/4"X11 | 35 | 20 | 17.5 | 39 | 50 | 50 | |
| 1CG-52-20 | M52X2 | G1.1/4"X11 | 42 | 20 | 19 | 42 | 55 | 60 | |
| 1CG-52-24 | M52x2 | G1.1/2"X11 | 42 | 21.5 | 19 | 42 | 55 | 60 | |
| 1CG-52-32 | M52x2 | G2"X11 | 42 | 24.5 | 25 | 44 | 70 | 60 | |
| 1DG-14-04 | M14X1.5 | G1/4"X19 | 6 | 10 | 13 | 28 | 19 | 17 | 63 重系列 S |
| 1DG-16-04 | M16X1.5 | G1/4"X19 | 8 | 10 | 15 | 31 | 19 | 19 | |
| 1DG-18-04 | M18x1.5 | G1/4"X19 | 10 | 10 | 14.5 | 31 | 19 | 22 | |
| 1DG-18-06 | M18x1.5 | G3/8"X19 | 10 | 11.5 | 15 | 31 | 22 | 22 | |
| 1DG-20-06 | M20x1.5 | G3/8"X19 | 12 | 11.5 | 17 | 32 | 22 | 24 | |
| 1DG-20-08 | M20x1.5 | G1/2"X14 | 12 | 14 | 17.5 | 34 | 27 | 24 | |
| 1DG-22-06 | M22x1.5 | G3/8"X19 | 14 | 11.5 | 19 | 37 | 24 | 27 | |
| 1DG-22-08 | M22x1.5 | G1/2"X14 | 14 | 14 | 19 | 37 | 27 | 27 | |
| 1DG-24-04 | M24x1.5 | G1/4"X19 | 16 | 11 | 18 | 37 | 27 | 30 | |
| 1DG-24-08 | M24x1.5 | G1/2"X14 | 16 | 14 | 18.5 | 37 | 27 | 30 | 40 重系列 S |
| 1DG-30-12 | M30x2 | G3/4"X14 | 20 | 15.5 | 20.5 | 42 | 32 | 36 | |
| 1DG-36-12 | M36x2 | G3/4"X14 | 25 | 15.5 | 23 | 47 | 41 | 46 | |
| 1DG-36-16 | M36x2 | G1"X11 | 25 | 18 | 17.5 | 47 | 41 | 46 | |
| 1DG-42-16 | M42x2 | G1"X11 | 30 | 18 | 23.5 | 48 | 46 | 50 | |
| 1DG-42-20 | M42x2 | G1.1/4"X11 | 30 | 20 | 23.5 | 50 | 50 | 50 | |
| 1DG-52-24 | M52x2 | G1.1/2"X11 | 38 | 21.5 | 26 | 57 | 55 | 60 | 31.5重系列S |
| 注：如需带卡套及卡套螺母整套订货，则请在代号后加“RN”, 如 1DG-20-08RN。 Note：In case if you are interested to order the adapter in complete set with cutting ring and nut ,it is necessary to insert suffix "RN" after our part no.，for example 1DG-20-08RN. | |||||||||
（１）按第9章要求对务必磷化处理的管子先要磷化处理处理；
（２）按务必长度用数控锯床或专用激光切管机等设备断掉管子，毫无疑问不允许用溶断（如数控机床数控火焰切割）或沙轮片光纤激光切割；除去管子端尾內外圆毛刺、金属复合材料钻削及污垢；除去不锈钢板材三通接头的防锈剂及污垢；此外还要保证管子同轴度；
（３）将螺帽、卡套先后套入管子，卡套前端工程师伤口（小道端）距管子口至少2毫米，接着将管子插到不锈钢接头人体锥孔，抵到才行；
（４）慢慢地扭紧螺帽，此外转动管子直至不动时，再扭紧螺帽2/3～4/3圈；
（５）拆装检查卡套是否已挑选管子，位置是否适当。不锈钢接头卡套不允许有轴向移动，可稍有转动；
（６）三通式管接头检查合格后再度扭紧不锈钢接头螺帽。
扫一扫，微信咨询
